XTOOL KS-1 Smart Key Emulator for Toyota Lexus All Keys Lost No Need Disassembly Work with X100 PAD2, PAD3, PS80, PS90
XTOOL KS-1 Smart Key Emulator for Toyota Lexus All Keys Lost No Need Disassembly Work with X100 PAD2/PAD3
KS-1 The five-in-one simulation card can eliminate the need to disassemble the smart box and other modules.
As long as the original car data is read from the OBD to generate the simulation card, the ignition switch can be turned on to realize the function of clearing and adding the smart key.
Highlights of Xtool KS-1:
1.Toyota/Lexus All Lost No Need Disassembly
2. Support Toyota/Lexus all key lost and dismantled,read the original car data from OBD to generate emergency simulation key,directly drive the car without disassemble, intelligent and efficient
3. Intelligently Generate New Keys
4. Through reading of the original car data, a smart key is generated, which can be operated according to the process of adding a key.
Supporting generation,copying and simulation functions of the key chip
5. Support Toyota 94 / D4, 98, 39, 88 / A8, A9 type smart key all-key-lost matching. Matching speed is fast
6. The simulation card can be reused. After matching the key, turn off the power or remove the battery to restore the initial state.
7. Functions also includes generation, copy and simulation of key chip.
Compatible With Those Devices:
X100 PAD2 PRO
X100 PAD3
XTOOL X100 PAD2 (Need Buy KC100)
A80 (Need Buy KC100)
PS90 (Need Buy KC100)
H6 (Need Buy KC100)
X100 PAD Elite (Need Buy KC100)
Xtool KS-1 Key Type Support List: (Keep Updating)
| NO. | Vehicle | Year | Key Type | Support or Not | Remarks |
| 1 | RAV4 | 2015 | 88 | Yes | |
| 2 | Alphard | 2013 | 94 | Yes | |
| 3 | Alphard | 2015 | A9 | Yes | |
| 4 | Previa | 2008 | 94 | Yes | |
| 5 | Crown | 2010 | 98 | Yes | |
| 6 | Crown | 2015 | A8 | Yes | |
| 7 | Crown | 2016 | A8 | No | After 2016,Toyota Crown is not supported |
| 8 | Prado | 2011 | 98 | Yes | |
| 9 | Previa | 2013 | 94 | Yes | |
| 10 | Reiz | 2011 | 98 | Yes | |
| 11 | Innova | 39 | Yes | The car is being tested for the Indian Tango |
Xtool KS-1 Specifications:
| Parameter | Index |
| Battery | CR2025 3V 165mAh |
| Standby current | Standby current≤2μA |
| Reading and writing frequency | 125kHz |
| Status Indicator Lamp | 1pc (mode: turn on and light up for 2s and then extinguish; Flicker, flash, 0.5s/ time when writing or reading) |
| Update | The simulation card firmware can be updated with KC100 |
| Working temperature | -20℃~60℃ |
| Storage temperature | -20℃~70℃ |
| Structure size | 66mm*40mm*12mm |
