PD60 + MN300+ YC600 Automotive Injector Ignition & Sensor & CKP CMP Signal Simulator
PD60 + MN300+ YC600 Automotive Injector Ignition & Sensor & CKP CMP Signal Simulator
Packing List:
【PD60+】 Fule Injector Ignition Simulator
【MN300】Sensor Simulator
【YC600】 CKP CMP Signal Simulator
PD60 Features:
- Simulation of 12-24V electromagnetic diesel fuel injector.
2. 12V gasoline injector simulation.
3. Positive trigger ignition coil simulation.
4. Negative Trigger ignition coil simulation.
5. With voltmeter and ammeter
6. Real-time display computer module.
7. Operating voltage and current
8. With overcurrent protection circuit.
9. Diagnostic socket with OBD.
10. With CAN data acquisition socket.
11. Terminal resistance with 120Ω
12. With high power resistance (used to simulate fuel metering valve)
Note: This product does not have a signal generator and can not simulate sensor signals.
MN300 Features:
- analog voltage type sensor:Accelerator pedal sensor, throttle position sensor, oxygen sensor oil rail pressure sensor, boost pressure sensor, engine oil pressure sensor, intake pressure sensor, air conditioning pressure sensor, etc
2. analog resistance type sensor:Coolant temperature sensor, intake temperature sensor, oil temperature sensor,exhaust temperature sensor, fuel temperature sensor, evaporator temperature sensor, ambient temperature sensor, etc.
3.oxygen sensor signal 0.1-0.9V automatic jump.
4. The ratio of two signals of the accelerator pedal sensor is 2:1.
5. the sum of the two signals of the throttle position sensor is equal to 5v.
6. Built-in precision multi-coil wire-wound potentiometer.
7. multiple sensor signal output at the same time, each signal is adjusted
separately, do not interfere with each other.
YC600 Main Features
1. Used for testing gaspiine, diesel, natural gas ECU. 2. 6-channels signat synchronous output (three Hall and three magneto-electric). 3. Simulate crankshaft and camshaft sensor signals. 4. Have PC software, waveform editing. 5. The host can save up to 99 kinds of wavelcon files. 6. The current settings can be saved, the next boot automatically loaded. 7. Signal frequency range 1-8000HZ. 8. Hall ampltude 1.5-14V Car/motorcycle/Truck/construction machinery 9. 12-24VDC working power supply
|
Specification
|
|
|
Power supply
|
DC 12-24V
|
|
Output signal
|
Hall and magnetoelectric
|
|
Frequency range
|
1-8000Hz
|
|
Hall amplitude
|
1.5-14V
|
|
Magnetic amplitude
|
±12V
|
|
Number of channels
|
6
|
|
Usage Tips
|
|
1,The instrument needs external 12-24V DC regulated power supply to use.
|
|
2,The host computer software,you need to use the Windows operating system to run the computer.
|
|
3,This instrument is a special equipment for automobile maintenance.
|
|
Non-professional personnel should use it under the guidance of automobile maintenance technicians.
|
Notice:
1. the inst ent needs an external power supply, the power supply needs to be prepared by the user, you can use the car battery or use 12-24V DC regulated power supply.
2. this inst ent is a special equipment for auto repair, non-professional personnel please use under the guidance of auto repair technicians Please check as much as possible to make sure the item is what you need.
Due to different batches, there may be differences in product appearance and printed text, which will not affect use
